On-Site EPR Measurements - DoS Testing

Element can evaluate the Degree of Sensitization (DoS) on-site using a non-destructive Double Loop Electrochemical Potentiokinetic Reactivation (DL-EPR) test method, to provide you with faster and more effective test results.

Sensitization in austenitic stainless steels causes the susceptibility of materials to Intergranular Corrosion (IGC) and Polythionic Acid Stress Corrosion Cracking (PASCC), which are well-known phenomena in the chemical and petrochemical industries.

有几种方法可以确定材料是否被敏感，例如ASTM A262 practice E, however these methods are destructive and cannot be carried out in the field.

As part of ouron-site metallographic testing and analysis, Element can perform a non-destructive DL-ERP testing of austenitic alloys on-site to determine the degree of sensitization and deliver much easier and faster results than laboratory tests.

Double Loop Electrochemical Potentiokinetic Reactivation (DL-EPR) test method

我们的订婚专家carry out the test on-site by attaching a test tube to the prepared surface. We can run a polarization scan from 100 mV below OCP (~ -500mV) to approx. 500mV and immediately reversed. From this cyclic scan we can determine the maximum current density for the activation cycle (Iac) and the reactivation cycle (Ireac).

DoS value and grain size

The DOS-value is the ratio of Ireac/Iac. As grain size can have a huge influence on the DoS measurements, results obtained directly from the DOS test have to be corrected for grain size. Element will carry out areplica examination testing检查表面determine the grain size and provide qualitative results regarding the amount, distribution and nature of precipitation. The combination of DoS testing with Replica testing will give a quantitative and qualitative assessment of the material condition.

Limitations of on-site DL-PR and DoS

The DOS-value produced is a relative term (%) and not the absolute current densities. Equipped with state-of-the-art laboratories and the latest testing equipment, Element’s Engaged Experts offer effective approaches to perform DL-EPR and measure DoS more accurately when conducted on-site.

我们知道测试期间可能发生的边缘效果，我们的专家确保取消了这些影响和不准确性。我们在必要时补充我们的现场功能，并在必要时进行了额外的实验室测试，我们一直在积极开发现场测量的验收标准。

For more information about how we perform on-site EPR measurements - DoS testing, or to request a quote,contact us today.